US $75.00
|
|
Airmar 33-417 P17 Plastic Thru-Hull Housing, Nut and Washer P17 Thru Hull Plastic Housing with Nut and Rubber Washer.... |
|
|
Airmar 33-100 B17 Bronze Thru-Hull Housing with Nut and Washer B17 Bronze Thru-Hull Housing Tube with Restraint Nut and Washer.... |
The Humminbird Fishin 'Buddy Fish Finder 140C is a fish mobile Downlooking color and research capabilities SideFinder sonar. Downlooking sonar sends sound waves from the bottom of the probe in water is directly under the transducer. Projects SideFinder sonar sound waves from the flat side of the sensor housing in the bottom of the tree transducer. The sonar is able to see SideFinder Place fish in your boat and you can scan fish when cast. A pollster generally not allowed to see these fish.
The role Downlooking sonar uses a beam of 200 kHz allows the cone angle of 34 degrees. The function has a tilted beam of 455 kHz, which offers an angle of 10 degree cone. The surface of the fund is best when it focuses only on the functionality downlooking, but a definition of the substance can be obtained when the beam is devoted to the beam angle.
When the 140C Fishin Buddy is in use, it is preferable to travel on slow, speed drift. The Fishin 'Buddy can be damaged at high speeds, and also whether hitting the bottom or underwater objects. The owner must use a boat to a lower speed during operation of the fish finder. As the boat moves, the display 140C Fishin Buddy changes in the composition of the bottom, submerged objects, fish, bait and thermoclines be able to see where cast.
Introduction to 140C Fishin Buddy
Getting started with your new partner Fishin target = "_blank" title = "Fish Finder"> Fish Finder is easy. There are 6 easy steps which are detailed in the owner's manual. The steps briefly discussed in this article. For Complete instructions consult your owner's manual.
The 6 steps
- Placing the identifier address
- Battery Installation
- Attaching the Control head Fishin Buddy
- Connect the cables to the head control
- Mounting bracket and securing the Fishin Buddy Boat
- Mounting the Fishin Buddy
Step 1
Placing the identifier of the address is easy. Just screw the handle direction by always. That's it!
Step 2
The Fishin Buddy requires 6 AA batteries (not included). It is easily placed in the battery and the manual describes this step in detail.
Step 3
The next step is to install the control head in the Fishin Buddy. The manual includes detailed steps and diagrams for this task quickly and easily.
Step 4
Then, connect the cables to the control head using the key connectors on the back of his head control. The manual includes a diagram of this step.
Step 5
The next step is to connect the mounting bracket to the boat. This step has two options. You can use the C clamp to mount the support Temporary you can use the Fishin Buddy in multiple vessels or permanent spaces can use the mounting bolts to support the vessel. The choice It is for you to do.
Step 6
The last step is to mount the Fishin Buddy in the media. To mount the camera, drag the tree to the Assembly Fishin Buddy Support arm support. Then set the fish finder as needed. You can adjust the axis to length varies from 24 inches 40 inches. Now all you have to do is go fishing and fisheries.
The 140C Fishin Buddy is a great fish finder. It is affordable and easy to use. The controls are simple and its features will certainly help a fisherman to find more fish. This model is particularly good in shallow water and is a great way for novice fishermen so that their feet wet with a simple to use the fish Finder. Once you become more experienced then be updated.
Have fun catching fish!
About the Author:
Karen Janos is an expert on fish finders. When she is not fishing she is the webmaster for http://www.fishfindersdirect.com.
Article Source: ArticlesBase.com - The Humminbird Fishin Buddy 140C Color Fish Finder Tips
